Auto And Collision Repair La Feria
Posted in Body Collision Repair Texas on June 28, 2019
Tags: Auto And Body Repair La Feria, Auto Body And Repair Shops La Feria, Auto Body Jobs La Feria, Auto Body School La Feria, Auto Body Work Shop La Feria, Auto Damage Repair La Feria, Best Auto Body Repair Shop La Feria, Best Auto Paint Shop La Feria, Body Collision Shop La Feria, Body Shop Collision Center La Feria, Body Shop Collision Repair La Feria, Body Shop Repair Estimate La Feria, Car Auto Body La Feria, Cheap Auto Body Repair La Feria, Good Auto Body Shop La Feria, Paint And Body Repair La Feria, Top Auto Body Shops La Feria
Car repair service is something that it's worth spending some time doing a little research about in order to find a shop that's a good fit for you and your car. As with most services, it pays in the long run to spend some time shopping around for a good, honest car repair shop. Time spent finding the best South Texas auto repair facility for you and your car is an investment of time and effort that will give you peace of mind and could potentially lengthen the life of your car. La Feria
When weather or bad luck leaves your car in need of professional body repair, car painting, or auto glass replacement, a qualified body shop or car rebuilder will give you straight answers, an honest estimate, and a clear timeframe.
La Feria
If your like me having a clean and sharp looking car is very important. You take your car to get washed and detailed, you may even spend the money to have the car repainted, just to get that showroom floor look. All this washing and polishing may make your paint look great, but can wreak havoc on your tail light lenses. Today we will outline what it takes to polish your tail lights to give them a better than new shine.The supplies needed to do this project are relatively cheap, some of which you may already have around the house. The rest of them can be easily obtained from your local hardware store or auto body supply house. You will need some 400 grit wet sanding paper, a buffing wheel, a buffer to mount it to, a clean terry cloth towel, and some sort of plastic polishing compound. Several companies have products on the market for this, I prefer the one made by the Eastwood Company.Start by removing the tail lights from the vehicle. Some people will attempt to leave the tail lights in during this step, however it is not recommended as you can slip and accidentally sand down your cars paint. Once removed you may start sanding down the lenses with your 400 grit wet sand paper. It is not necessary to sand the entire lens, just any blemishes on them. You may also choose to sand down the DOT lettering and other part numbers at this time, to give a cleaner look. Be sure to keep the sand paper wet.Once you have finished sanding down the lens, wash it thoroughly with soap and water. I recommend using a dish soap for this part as the de-greasing agent in the soap will remove any remaining wax that may be on the lens. Dry the lens fully.Once the lens is dry, its time to start the polishing process. Spin the buffing wheel and start to pick up the polishing compound you got from the auto body repair supply house into it. Do not take to much compound on the wheel, just enough to start to change the color of the wheel. Start applying it to the lens, but be careful not to sit in one area for to long as this will cause a over heating issue which can lead to a warped and melted lens. Move quickly back and forth over the lens and you will avoid this issue all together. Wipe any excess compound off with the towel. If you start to get black blobs on the surface its a sign that you are using to much compound.At this point continue buffing until you see desired results. It wont be long now until your old lenses have a new glass like finish! Sit back, relax, and enjoy your results.
How To Find The Best Auto Body Collision Repair Center
Today's vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop to be aware of the different materials and techniques used for repairing them.Auto body shops and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.Bumper RepairsWhen a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills. A good, eco-friendly auto body shop will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part. Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.Working with PlasticsThe first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.Adhesive RepairsThe bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.FlexibilitySome repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.Cleaning and PrepProper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
